Commerce Panel – Consumer Information – Different – 12 April 2025

Checklist of primary capabilities

Commerce. Permits you to carry out buying and selling operations in a single click on:

• Open pending orders and positions with automated threat calculation.
• Open a number of orders and positions with one click on.
• Open order grid.
• Open orders on a number of symbols with one click on.
• Shut pending orders and positions by teams.
• Reversal of the place (shut Purchase > open Promote and shut Promote > open Purchase).
• Locking a place (equalize the volumes of Purchase and Promote positions by opening a place with the lacking quantity).
• Partial closing of all positions with one click on.
• Setting take revenue and cease loss for all positions on the similar value stage.
• Setting cease loss for all positions to the breakeven stage of the place.

When opening orders and positions, the next capabilities will be utilized:

• Distribution of the calculated quantity between a number of orders or positions (when opening a number of orders and positions with one click on).
• Visualization of buying and selling ranges of the longer term order on the chart.
• Cancel opening a place if the present unfold exceeds the desired one.
• Automated ratio between take revenue and cease loss.
• Digital cease loss and take revenue.
• Automated improve of cease loss and take revenue by the dimensions of the present unfold.
• Calculation of take revenue and cease loss based mostly on the ATR indicator readings.
• Setting the expiration date of a pending order.
• Trailing for a pending order (a pending order mechanically strikes following the present value).
• The power to handle orders and positions opened from a cell terminal (cellphone).

Danger supervisor and buying and selling report. Permits you to analyze your buying and selling historical past:

• Shows the buying and selling historical past on the chart. Permits you to select which trades to show on the chart, all trades, solely Purchase, Promote, Worthwhile, Loss positions.
• Generates a buying and selling report for the present image or your entire account.

Permits you to management the danger in your buying and selling account:

• Exhibits revenue per day, week and month.
• Limits every day, weekly and month-to-month loss.
• Limits every day, weekly and month-to-month earnings.
• Limits the variety of trades per day.

When the restrict is reached, the panel can:

• Show messages on the chart, ship notifications to the cellphone or ship an e-mail.
• Shut all positions and pending orders.
• Lock positions (equalize the volumes of Purchase and Promote positions by opening a place with the lacking quantity).
• Shut the terminal till the following day.

OCO orders. Permits you to create OCO orders.

An OCO order is 2 pending orders linked by a mutually canceling perform: when one order is executed, the second order is deleted.

Closing orders and positions. Permits you to shut all pending orders and positions if the overall revenue or lack of the positions reaches a specified worth:

• Can shut orders and positions on the present image or on your entire account.
• Can have in mind the revenue on Purchase+Promote positions, or solely Purchase, or solely Promote.
• Can shut all positions and orders, or solely chosen varieties.

Duties. Permits you to set deferred duties for opening and shutting orders and positions:

The duty is activated when the desired time is reached, when the value touches the duty line, or when one other process is activated.

The duty can open or shut any kind of orders and positions.

Trailing cease perform. Permits you to set the trailing cease perform for a place (shifting the cease loss in direction of revenue in response to a sure algorithm).

• 7 sorts of trailing cease.
• Has a “Begin” perform.
• You need to use a digital cease loss.

Break-even perform. Permits you to set a break-even perform for a place (transfer stop-loss to the place opening value when a specified revenue is reached):

• The variety of break-even ranges per place is limitless.
• Permits you to set an indent from the place opening value to the stop-loss value.
• You need to use a digital stop-loss.
• Permits you to set the space in certainly one of 4 measurement choices: in factors, as a proportion of stop-loss, as a proportion of take-profit, or value.

Partial shut perform. l Permits you to set the partiaclose perform for a place (shut a part of the place when a specified revenue or loss is reached):

• The variety of partial shut ranges per place is limitless.
• Permits you to set the shut quantity in certainly one of three measurement choices: mounted lot measurement, % of the present lot measurement, % of the preliminary lot measurement.
• Permits you to set the space in certainly one of 5 measurement choices: in factors, in cease loss proportion, in take revenue proportion, value, factors+trailing.

Alert. Permits you to set an alert that may set off when the value touches a specified line or reaches a specified time.

Alerts will be displayed on the chart and in messages despatched to e-mail or cell.

Chart administration. Permits you to change symbols on terminal charts and analyze image knowledge:

• You’ll be able to create as much as 4 lists with symbols. The checklist of symbols and its title is ready by the person.
• You’ll be able to choose a logo to Favorites.
• A separate checklist of symbols which have open orders and positions.
• Buttons with a logo will be highlighted in any colour.

Info panel. Exhibits present details about the image:

• Unfold.
• Time till the bar closes.
• Revenue on the present image.
• Variety of positions and their buying and selling quantity.
• ATR indicator readings.
• ATR indicator energy reserve.
• Break-even value for positions on the present image.

Orders and positions administration. Permits you to handle order and place settings:

• Edit cease loss and take revenue.
• Edit digital cease loss and take revenue.
• Edit trailing cease perform.
• Edit breakeven perform.
• Edit partial shut perform.
• Full or partial place closure.
• Mechanically delete a pending order at a specified time or value.

Order grid administration. Permits you to handle the order grid settings:

• Edit cease loss and take revenue for all orders within the grid.
• Edit digital cease loss and take revenue for all orders within the grid.
• Set the trailing cease perform for the order grid.
• Set the breakeven perform for the order grid.
• Full or partial closure of the order grid.

Toolbar

Panel for Commerce

“Open” tab

Quantity calculation technique

The lot for a brand new order is calculated in certainly one of six methods:

* The lot measurement is calculated in such a approach that the loss from closing a place by cease loss will probably be equal to the desired threat worth. The utility calculates the lot itself, the dealer solely must set the danger worth.
Instance:
Lot calculation technique: SL in % of steadiness.
Danger per commerce: 3%.
Present steadiness: $1,000.
With the desired parameters, the loss from a commerce when closing it by cease loss will probably be: $1,000 * 3% = $30.

Digital Cease Loss and Take Revenue

Digital cease loss and take revenue are value ranges tied to an order (place). When the present value touches these ranges, the place will probably be closed. Digital stops carry out the identical capabilities as common stops, they assist you to repair a loss and revenue.

What are digital sl and tp for?
The one function of digital cease loss and take revenue is to cover them from the dealer. The dealer doesn’t see digital sl and tp and due to this fact will be unable to knock them out by manipulating the value.

Why does the dealer not see digital sl and tp?
Cease loss and take revenue (let’s name them actual sl and tp) are saved on the dealer’s buying and selling server and are executed by the buying and selling server. Accordingly, the dealer is aware of the placement of the cease loss and take revenue. Digital sl and tp are saved within the panel and are executed by the panel. The panel itself screens the present value, and if the value touches the digital sl or tp, the panel itself will shut the place.

Disadvantages of digital sl and tp:

• Since digital sl and tp are executed within the terminal, value slippage is feasible when closing a place.
• Since digital sl and tp are executed by the panel, they won’t work if the terminal or panel is turned off.

How one can open a place

Technique #1:

1. Enter the required parameters: Remark 2, Danger calculation kind and threat measurement 3,4. If you wish to substitute actual TP and SL with digital ones, allow test 8.
2. Click on the “Line Promote” button if you happen to open Promote or “Line Purchase” if you happen to open Purchase 12.
3. Utilizing labels 20 or fields 11, set the TP and SL costs. If needed, use the mounted ratio of 6,7, button 9 to change Worth / Level, button 10 if you wish to use the ATR indicator as TP and SL.
4. Allow perform 13 if you wish to open a place provided that the present unfold is lower than the desired one.
5. Click on the Open Promote or Open Purchase button.

Technique #2:

1. Enter the required parameters: Remark 2, Danger calculation kind and threat measurement 3,4. If you wish to substitute actual TP and SL with digital ones, allow test 8.
2. Enter TP and SL in fields 11. If needed, use a hard and fast ratio of 6,7, button 9 to change Worth/Level, button 10 if you wish to use the ATR indicator readings as TP and SL.
3. Allow perform 13 if you wish to open a place provided that the present unfold is lower than the desired one.
4. Click on the “Promote” or “Purchase” button 14.

How one can open a pending order

Technique #1:

1. Enter the required parameters: Remark 2, Danger calculation kind and threat measurement 3,4. If you wish to substitute actual TP and SL with digital ones, allow test 8.
2. Click on the “Line Promote” button if you happen to open Promote or “Line Purchase” if you happen to open Purchase 12.
3. Utilizing labels 20 or fields 11 set the order opening value, TP and SL. If needed, use the mounted ratio 6,7, button 9 to change Worth/Level, button 10 if you wish to use the ATR indicator as TP and SL.
4. Activate trailing 17 if you need the pending order to comply with the present value.
5. Activate expiration 18 if you need the pending order to be deleted at a specified time.
6. Click on the Open SellLimit/ SellStop or Open BuyLimit/ BuyStop button.

Technique #2:

1. Enter the required parameters: Remark 2, Danger calculation kind and threat measurement 3,4. If you wish to substitute actual TP and SL with digital ones, allow the test 8.
2. Enter the order opening value, TP and SL in fields 16 and 11. If needed, use a hard and fast ratio 6,7, button 10 if you wish to use the ATR indicator readings as TP and SL.
3. Allow trailing 17 if you need the pending order to comply with the present value.
4. Allow expiration 18 if you need the pending order to be deleted at a specified time.
5. Click on the “SellLimit“, “SellStop“, “BuyLimit” or “BuyStop” button 15.

How one can open orders on a number of symbols in a single click on

“Shut” tab

1. Partially shut all positions.
2. Shut worthwhile positions.
3. Shut unprofitable positions.
4. Shut all orders and positions.
5. Shut Purchase positions.
6. Shut Promote positions.
7. Shut pending Purchase orders.
8. Shut pending Promote orders.
9. Apply near all symbols.

How one can shut orders and positions

To partially shut all positions, enter the % to shut and click on the 1 button.

To shut orders and positions of a given kind, click on the 2, 3, 5, 6, 7 or 8 button.

To shut all Orders and Positions, click on the 4 button.

To make the panel apply closing of orders and positions to all symbols, allow the checkbox 9.

“Grid” tab

This tab (part) is an addition to the “Open” tab, and is designed to configure the order grid. The order grid will probably be created when opening an order from the “Open” tab.

How one can open a number of orders or positions in a single click on

1. Set the variety of further orders or positions 3,4 and their quantity 5-9.
2. Set Step = 0 (10).
3. Set the calculation technique of TP and SL of further orders or positions.
4. Open a place or order in response to the directions above.
5. After the place or order (master-order) is opened, the panel will open further positions or orders. The kind and value of the order or place opening would be the similar because the master-order.

How one can open an order grid

1. Set the order grid kind (Cease or Restrict) 1,2.
2. Set the variety of orders within the grid 3,4 and their quantity 5-9.
3. Set the step between grid orders 10-12.
4. Set the calculation technique for TP and SL of grid orders.
5. Open a place or order in response to the directions above.
6. After a place or order (grasp order) is opened, the buying and selling panel will open the order grid. The master-order would be the first order of the grid.

“Different” tab

1. Reverse positions:
   • Promote– the panel will shut all Promote positions and open one Purchase place with a quantity equal to the quantity of closed Promote positions.
   • Purchase – the panel will shut all Purchase positions and open one Promote place with a quantity equal to the quantity of closed Purchase positions.
   • All – the panel will shut all Purchase and Promote positions, open one Promote place with a quantity equal to the quantity of closed Purchase positions, open one Purchase place with a quantity equal to the quantity of closed Promote positions.
2. Lock positions. The panel will open an extra place that may make the volumes of Purchase and Promote positions equal.
3. Change Digital Cease Loss.
4. Set SL of every place to the opening value of the place. Within the subject – the worth of the SL offset from the opening value of the place.
5. Change Digital SL and TP.
6. Take away TP and SL for all positions.
7. Set TP and/or SL to the widespread stage:
   • Purchase SL TP– set TP or SL of Purchase positions to the widespread stage.
   • Promote SL TP– set TP or SL of Purchase positions to the widespread stage.
   • All SL TP– set TP and SL of Purchase and Promote positions to the widespread stage.
8. Distance between TP Purchase and SL Promote or TP Promote and SL Purchase (just for the All SL TP button).
9. A label with a line indicating the extent at which Cease Loss or Take Revenue will probably be set. Displayed after urgent the 5 button.

How one can reverse positions

How one can lock positions

How one can set cease lack of every place to the breakeven value of the place (the opening value of the place).

How one can set Cease Loss or Take Revenue of positions to the overall stage

To set Take Revenue or Cease Lack of Purchase positions to the overall stage, click on the Purchase SL TP button. Transfer the label that seems on the chart to the specified stage and click on the Modify button.

To set Take Revenue or Cease Lack of Promote positions to the overall stage, click on the Promote SL TP button. Transfer the label that appeared on the chart to the specified stage and click on the Modify button.

To set Take Revenue of Promote positions and Cease Lack of Purchase positions, or to set Cease Lack of Promote positions and Take Revenue of Purchase positions to the overall stage, click on the All SL TP button. Transfer the label that appeared on the chart to the specified stage and click on the Modify button. If needed, set the indent between Cease Loss and Take Revenue within the subject 6.

To vary the digital Cease Loss and Take Revenue, allow the checkbox 4.

Panel for Danger Supervisor and Buying and selling Report

Commerce report

The tab is meant for analyzing buying and selling outcomes.

1. Tab Commerce Report.
2. Present report solely from present image.
3. Present outcomes of closed trades on chart.

For MetaTrader 5, the buying and selling report is generated based mostly on your entire buying and selling historical past.
For MetaTrader 4, the buying and selling report is generated based mostly on the checklist of closed orders from the Account Historical past tab of the Terminal.

Danger supervisor

The tab is designed to manage the danger on the buying and selling account.

1. Present revenue within the deposit foreign money, in % of the steadiness, and the variety of open positions on the present day.
2. Situations for activating the danger supervisor.
3. When the situation is activated, show a message on the chart.
4. When the situation is activated, ship a notification to the cell terminal (smartphone). *
5. When the situation is activated, ship a message to EMAIL. **
6. When the situation is activated, shut all positions on the buying and selling account.
7. When the situation is activated, delete all pending orders on the buying and selling account.
8. When the situation is activated, lock all positions on the buying and selling account (open further reverse positions that may equalize the volumes of Promote and Purchase positions).
9. When the situation is triggered, shut the terminal and prohibit its opening till the following date.
10. When the situation is activated, carry out all enabled actions and disable the situations (apply the motion solely as soon as).
11. Allow the danger supervisor situation.
12. A subject for coming into the Revenue (Loss) quantity, upon exceeding which the set threat supervisor motion will probably be activated. In every subject you may enter each a constructive and a unfavorable worth (with a minus signal), and the entered worth will probably be used as is.
13. Button for switching the unit of measurement of Revenue (Loss) (within the deposit foreign money or %).
14. Frequency of sending messages. If the worth is 0, the message will probably be despatched 1 time.

How one can set up threat supervisor

• Choose the situations for activating the danger supervisor 2 and go to its settings.
• Within the settings, specify the motion that the panel will carry out if the situation is activated 3-9.
• Allow checkbox 10 if the danger supervisor needs to be used solely as soon as (after activation and execution of the motion, the danger supervisor for the chosen situation will probably be disabled).
• Enter the worth upon reaching which the danger supervisor is activated 12 (if you happen to enter a unfavorable quantity, enter it with a minus signal).
• Allow checkbox 11.

Panel for OCO orders

The panel is designed for putting OCO orders.

1. Button for creating an OCO order.
2. Checklist of put in OCO orders.
3. Fields for coming into order tickets that will probably be linked within the OCO order.
4. Button for putting in an OCO order.
5. Order labels.

How one can create an OCO order

1. Click on the “+OCO order” button 1.
2. Enter the ticket numbers within the fields 3, or choose orders utilizing the labels 5 (click on on the labels of the required orders).
3. Click on the OK button 4.